Powder Room Reno Part 1

So here is what we started with:

It wasn't horrible. However, it was a a bit stuck in the 90's and not really our style. The sponge paint on the walls was going to be the first thing to go. Along- with the super old toilet that gave me the heebie-geebies.

So we started taking it apart...with a plan and a small budget in mind. We planned to overhaul this space for under $1000.00 and I think we did it! More on that to come later.

So first things first. We took out the vanity and had to move the pipes behind  it. We moved the pipes that we coming up out of the floor, so that they were coming out of the back wall. We did this so that we didn't have to cut a hole up into the bottom of the new vanity.

Once we did that, we had to fix the drywall on the back wall and add tiles back onto the floor where the vanity had been.

Since the vanity was going to be going on top of the tiles, we weren't worried about chipping out the half tiles and replacing them with full tiles. We just wanted to make sure that there were tiles under the vanity as the vanity is raised off the floor and some tile will be visible.

Once the tiles were grouted, Ian removed the baseboards and fixed up the drywall:

It was his first time doing drywall, so we figured a wall that would be covered up with a vanity was a good place to start! However, I think he did a pretty good job for his first attempt!

Next, we put the baseboards back on and added some chair rail (because we apparently, really like adding mouldings to rooms!)

We then removed the ancient toilet and prepared to prime the space:

And the priming began:

and once it was done, it was already a million times better than what we started with!

So that's where we'll leave this post at for now. Next we'll talk about picking a wall colour, vanity and all of the other choices for the room! Stay tuned :)

P.S. Dont forget to enter our Giveaway! There's only 3 days left!

Melissa and Ian


WhatThePrint Giveaway!

We are steps away from finishing off our latest project (the powder room reno) and we can't wait to share with all of you! We took a bit of a different direction in this room, and I'm really hoping the end result is what we envisioned.

While finishing off this room, I began looking for some prints for the bathroom wall on Etsy. I came across Chelcey's adorable store called "What The Print?" Her shop is right up my alley- she sells prints, posters, greeting cards, instant downloads, printable home decor (so cool!) and so much more. Here are just a few of my favourites:

Her designs are so pretty and would look gorgeous in any room in your home. Chelcey contacted me about doing a giveaway and of course I was super excited to pass this onto all of you!

So one lucky winner will receive one of Chelcey's instant downloadable digital prints (which can be printed at whatever size you choose!)

Contest closes Saturday February 15th and details to enter are below.
One winner will be chosen and the contest is open worldwide.


a Rafflecopter giveaway


Nursery Change Table Topper DIY

Since we've posted about our nursery, one of the most asked questions we've had, has been "how did you make the change table topper in your nursery?". We had never done a post on it, as we didn't think it would be such a popular question, but based on your requests, here it is!

When we were designing the nursery, we decided that we wanted to get a dresser for the room rather than an actual change table. We think change tables are great, however based on the design of the room, we decided on getting the Ikea Hemnes 8-Drawer Dresser. We changed out the knobs to personalize it a bit, but otherwise left it as it.

We chose this dresser because it was the perfect height and depth to act as a change table as well as function as a dresser for a nursery (lots of drawers and storage). We could have just put a change pad on top of the dresser and been done with it, but I really liked the look of the topper and felt it gave a more finished look to the room (as well as making the dresser feel more like an actual change table).

So I scoured for change table toppers online. I looked for used ones and couldn't find any. I looked for new ones and couldn't afford any (the cheapest one I found was $100!). So I started to research on how we could do our own. I came across an excellent tutorial from Meg Made and used this as a bit of a guide, however we adjusted it a bit.

So here's how we did it!

DIY'ing your own Nursery Change Table Topper.

1. Purchase a change pad. Before doing anything you want to make sure you have your change pad so you can create your change table topper to fit. Most change pads are a standard size (32 x 16), but you still want to be sure.

2. Design your topper. I wanted a simple design and we determined that we didn't need a base on the topper- just the frame itself. I wanted the frame to be just a bit higher than the actual change pad as well.

3. We went off to Home Depot and purchased 2 pieces of MDF trim that were 84" length and 4" high. The actual change pad was just over 3" high, and I wanted the frame to be just a bit taller than the actual pad, which is why we chose 4". We calculated that we would make each long side 33" long and the short sides 17.5" deep. So when we added that up (33 x 2 and 17.5 x 2) we ended up with 101" plus a bit of extra for waste, so 2 pieces 84" long would work fine.

4. We cut the pieces to size on a 45 degree angle in order to make a nice smooth corner and this allowed the pieces to fit together nicely:

5. After the pieces were cut, we simply nailed them together (using small nails and a hammer, if you have a nail gun, even better), filled the nail holes with wood filler and once dry, sanded and then painted. We opted to paint the topper Simply White by Benjamin Moore, a. because we have a ton of it (all the trim in our home is painted that colour) and b. because it blended well with the colour of the dresser. If you were planning on staining your table topper, you would need to buy actual wood trim, rather than MDF, in order to be able to stain it.

6. Lastly, once it was dry, we added some rubber feet to the bottom of the topper so that it wouldn't slide around on the dresser. Done!

So there you go. Simple, easy and cost us less than $30.00.

I hope this helps all of you who were inquiring on making the topper yourselves, it's really a simple easy project that in the end, can save you a bit of money and looks great!

Melissa and Ian

Related Posts Plugin for WordPress, Blogger...